Single Phase AC Current Transducer NB-AI1B1-□□EC

AI1B1 series is a device that detects AC current in a wire, and generates a signal proportional to that current. The generated signal could be analog voltage(0-5V dc,0-10V dc) or current( 0-20mA,4-20mA) output. The generated signal can be then used to display the measured current in an ammeter, or can be stored for further analysis in a data acquisition system, or can be used for the purpose of control.

Specification

v Basic Accuracy：0.5%;

v Supply Voltage：+12Vdc、+15Vdc、+24Vdc

v Input Current Range：AC 1～30A

v Frequency Range：50～3000Hz

v Output：0-5Vdc、0-10Vdc、0-20mA dc、4-20mA dc

v Operating Temperature：-10℃～+60℃

v Load of Output：Voltage Output≥2KΩ；Current Output≤250Ω

v Static Power：≤0.3W

v Rated Power：≤0.7W

v Load of Insulation Voltage：DC 2500V

v Response Time：≤300ms

v Thermal Drift：≤300PPm/℃

v Lightening Surge:Power source end:2000V; Input end:10000A;Output end:500V;

v Case Style：E.

v Case Material：ABS (flame retardant).

v Installation: 35mm DIN Rail.

Wiring Diagram

Connection Diagram for Power Supply between 12--24V:

Hole-thru input; Terminals 11 and 12 are for output;  Terminals 10 and 11 are for power supply; Terminal 11 is GND, and Terminals 1-9 are NC (No Connection);