Single Phase AC Current Transducer NB-AI1B1-□□KC
AI1B1 series is a device that detects AC current in a wire, and generates a signal proportional to that current. The generated signal could be analog voltage(0-5V dc,0-10V dc) or current( 0-20mA,4-20mA) output. The generated signal can be then used to display the measured current in an ammeter, or can be stored for further analysis in a data acquisition system, or can be used for the purpose of control.
Specification
v Basic Accuracy：Class 0.5
v Power Supply：+12Vdc、+15Vdc、+24Vdc
v Input Current Range：AC 30～400A
v Frequency Range：50～3000Hz
v Output Signals：0-5Vdc、0-10Vdc、0-20mA dc、4-20mA dc
v Operating Temperature：-10℃～+60℃
v Load of Output：Output Voltage≥2KΩ；Output Current≤250Ω
v Static Power：≤0.3W
v Rated Power：≤0.7W
v Load of Insulation Voltage：DC 2500V
v Response Time：≤300ms
v Thermal Drift：≤300PPm/℃
v Lightening Surge:Power end:2000V; Input end:10000A;Output end:500V;
v Case Style：K.
v Case Material：ABS (flame retardant).
v Installation:35mm DIN Rail.
Wiring Diagram
Connection Diagram for Power Supply between 12--24Vdc：
Hole-thru input; Terminals 11 and 12 are for output, terminals 10 and 11 are for power supply; Terminal 11 is GND. And Terminals 1-9:NC (No Connection);
