AI11C series is a device that detects AC current in a wire, and generates a signal proportional to that current. The generated signal could be analog voltage(0-5V dc,0-10V dc) or current( 0-20mA,4-20mA) output. The generated signal can be then used to display the measured current in an ammeter, or can be stored for further analysis in a data acquisition system, or can be used for the purpose of control.
Specification
v Accuracy：Class 0.5
v Power supply：220Vac（optional）
v Input range：0～10Aac
v Frequency: 50Hz
v Output：0-5Vdc、0-10Vdc、0-20mAdc、4-20mAdc（optional）
v Operating temperature：-10℃～+60℃
v Load Capacity：Voltage output ≥2KΩ；Current output ≤250Ω
v Static Power：≤0.5W
v Rated Power：≤1W
v Load of Insulation Voltage：DC 2500V
v Response Time：≤300ms
v Thermal Drift：≤300PPm/℃
v Lightning Surge：Power-suply End 2000V; Input End 10000A; Output end 500V
v Case Style：M
v Case Material：ABS (flame retardant)
v Mounting: 35mm DIN Rail
Wiring Diagram
Wiring with power supply of 220Vac：
Terminals 1 and 3 are for input；Terminal 8 and 12 are for output. Terminal 12 is GND; Terminas 10 and 11 are for power supply; Terminals 2、4、5、6、7 and 9 are NC ( No Connection).
