Single Phase DC Current Transducer NB-DI1B4-□□KD
DI1B4-□□KD is a Bi-directional DC Current Transducer that detects DC current in a wire, and generates a signal proportional to that current. The generated signal could be±5V、2.5V±2.5V、12mA±8mA、10mA±10mA. The generated signal can be then used to display the measured current in an ammeter, or can be stored for further analysis in a data acquisition system, or can be used for the purpose of control.
Specification
v Accuracy：Class 1.0
v Powe supply：+12V、+15V、+24V（Optional）
v Input range：DC±10～±400A（Customizeable）
v Output：±5V、2.5V±2.5V、12mA±8mA、10mA±10mA（Customizeable）
v Operating termperature：-10℃～+60℃
v Load capacity：Voultage output ≥2KΩ；Current output ≤250Ω
v Static power：≤0.3W
v Rated power：≤0.7W
v Load of isolation Voltage：DC 2500V
v Response time：≤200ms
v Thermal drift：≤500PPm/℃
v Lightning surge：Power-supply end 2000V，Input end 10000A，output end 500V
v Case style：K
v Material case：ABS (flame retardant)
v Mounting: 35mm DIN Rail
Wiring diagram
Current hole-thru input. Terminals 8 and 12 are for output；Terminals 10 and 11 are for power supply. Terminal 12 is GND for both output and power supply. Terminals 1 to 7 and 9 are NC (No connection).
Instruction:
v Ensure correct wiring the terminals to avoid possible damage to the device; The mounting gap between two devices should be not less than 5mm. |
v In magnetic fields, the power lines should be in good conditions, and shieldings should be taken against the magnetic interference to the device. |
v Proper measures should be taken agaist the lighting if exposed into the outdoor environment, though this device has lightning protection ability. |
v Do not take the device apart. |
v Please keep the device cool and dry ,and store it away from humidity or high temperature. |
