Single Phase DC Current Transducer NB-DI1B4-□□MB
DI1B4-□□MB is a bi-directional input device that measures the DC Current in a wire, and then generates the signals that are proportional to that current. The generated signal could be ±5V、2.5V±2.5V、12mA±8mA、12mA±12mA; The generated signal can be then used to display the measured current in an ammeter, or can be stored for further analysis in a data acquisition system, or can be used for the purpose of control.
Specification
v Accuracy：Class 0.2
v Power Supply：+12Vdc、+15Vdc、+24Vdc、220Vac（Optional）
v Input Range：DC 0～±5A（Customizeable）
v Output：±5V、2.5V±2.5V、12mA±8mA、12mA±12mA（Optional）
v Operating Temperature：-10℃～+60℃
v Load Capacity：Voltage output ≥2KΩ；Current output ≤250Ω
v Static Power Consumption：≤0.5W
v Rated Power Consumption：≤1.5W
v Load of Isolation Voltage：DC 2500V
v Response Time：≤100ms
v Thermal Drift：≤200PPm/℃
v Lightning Surge Immunity：Power-supply end 2000V,Input end 2000V,Output end 500V
v Case style：M
v Case Materials：ABS (Flame retardant)
v Mounting：35mm DIN rail or screw
Wiring Diagram
Current Input Thru Terminals: Terminals 1 and 3 are for input; Terminals 8 and 12 are for output; Terminals 10 and 11are for power supply; Terminals 2、4、5、6、7 and 9 are NC (No Connection).
Instruction
v Ensure correct wiring the terminals to avoid possible damage to the device; The mounting gap between two devices should be not less than 5mm. |
v In magnetic fields, the power lines should be in good conditions, and shieldings should be taken against the magnetic interference to the device. |
v Proper measures should be taken agaist the lighting if exposed into the outdoor environment, though this device has lightning protection ability. |
v Do not take the device apart. |
v Please keep the device cool and dry ,and store it away from humidity or high temperature over 85C° |
