Single Phase AC/DC Current Transducer NB-HI1B6-A□KD
HI1B6-A□KD is an AC/DC Current Transducer that detects AC or DC current in a wire, and generates a signal proportional to that current. The generated signal could be 0-5Vac or 0-5Vdc which depends on the input current is AC or DC. The generated signal can be then used to display the measured current in an ammeter, or can be stored for further analysis in a data acquisition system, or can be used for the purpose of control.
Specification
v Accuracy：Class 1.0
v Power supply：+12V、+15V、+24V （optional）
v Input range：ACDC 10～400A（Customizeable）
v Output：0-5V
v Operating temperature：-10℃～+60℃
v Load of Voltage：output for voltage ≥2KΩ; output for current ≤250Ω
v Static power Consumption：≤0.3W
v Rated power Consumption：≤0.7W
v Load of Isolation Voltage：DC 2500V
v Response time：≤10ms
v Thermal drift：≤500PPm/℃
v Lightning surge Impect Immunity：Power-supply end 2000V，Input end 10000A，Output end 500V
v Case style：K
v Case material：ABS (Flame retardant)
v Mounting：35mm DIN rail or screw
Wiring diagram
Current Hole-thru Input；Terminals 8 and 12 are for output; Terminals 10 and 11 are for power supply;
Instruction
v Ensure correct wiring the terminals to avoid possible damage to the device; The mounting gap between two devices should be not less than 5mm. |
v In magnetic fields, the power lines should be in good conditions, and shieldings should be taken against the magnetic interference to the device. |
v Proper measures should be taken agaist the lighting if exposed into the outdoor environment, though this device has lightning protection ability. |
v Do not take the device apart. |
v Please keep the device cool and dry ,and store it away from humidity or high temperature above 85℃. |
